Skip to main content

Runtime calculation

How Long Will a Goal Zero Yeti 700 Run an Electric Blanket

This estimate separates electrical compatibility from battery endurance. Published specifications control where they exist, and every planning default is labelled where the manufacturer leaves a gap.

Estimated runtime
14 hours
From 677.37Wh rated capacity against a 38W average load.
Continuous output
600 W
What the inverter can sustain. Output decides whether the appliance runs at all.
Published peak
1,000 W
Manufacturer surge figure, used only for the startup check.

Our answer

On our planning profile the Goal Zero Yeti 700 runs an electric blanket for about 14 hours, or 11 hours if you keep a reserve back.

The checks behind this answer

Stored energy is the final check, not the first. Voltage, continuous output, and startup demand must clear before runtime means anything. Missing published evidence stays marked unverified instead of being treated as a pass.

Electrical checks applied to this station and appliance pairing
CheckResultWhy
VoltageClearsAn electric blanket runs on 120V and the Goal Zero Yeti 700 supplies 115V AC.
Continuous outputClearsA 75W running load sits inside the 600W continuous rating, leaving about 700% headroom.
Startup demandClearsThe 75W start is covered by continuous output alone, so no surge rating is needed.

How the number is built

A battery holds back some of its rated capacity, and converting to household AC costs more on top. Of the 677.37Wh rated here, roughly 536Wh reaches the outlet under a conservative planning model.

That energy meets an average load of 38W, which applies a 50% duty cycle to a 75W running draw. Holding back a 20% reserve for battery age, cold, and a longer outage leaves 11 hours. These are calculations, not measurements from a test.

Before you rely on this

These limits decide whether this appliance belongs on a portable battery at all.

  • Follow the manufacturer's instructions on unattended use. Many blankets are not intended to run all night.

Replace our assumptions with your own

This is the efficient way to stay warm on battery power. Heating a person uses a small fraction of what heating a room costs.

Read the nameplate or data label for voltage and rated amps or watts, then run the appliance through a normal cycle on a plug-in energy meter for 24 hours. Use the measured watt-hours in the calculator instead of the default on this page.

Continue through this cluster

Use the next page that answers your unresolved constraint

Evidence used on this page

Important fields are tied to a specific source. Manufacturer claims, government guidance, calculations, and planning assumptions remain separate.

  1. Published specification table covering capacity, chemistry, lifecycles, inverter output, solar input window, weight, and warranty.

    official product page

  2. Defines the capacity, efficiency, reserve, duty-cycle, voltage, continuous-output, and startup checks applied across the site. Planning defaults are visible on every page that uses them.

    planning assumption

  3. Published specification table: inverter output and waveform, every DC and USB port with its rating, the solar input window and current limit, AC charge input, and expansion.

    official product page