Sourced specification record
Goal Zero Yeti 1500
A 1.5kWh LFP station with a 2,000W inverter and a published 900W combined solar and DC input.
Direct manufacturer route. Amazon is excluded. This record uses published source material, not a hands-on test.

- Rated energy
- 1505.28 Wh
- Continuous AC
- 2000 W
- Solar ceiling
- 900 W
- Carry weight
- 52.75 lb
Decision summary
Where this model earns its place
How the record reads
Energy, output, and the appliance are three separate gates
The battery decides duration. The inverter decides whether a load can run and start. The appliance decides the voltage, connection, and surge demand that must be met.
LiFePO4
3,600 W published peak
Voltage, connector, startup, and operating mode
Resolved specification set
The numbers that change a real purchase decision
2,000 Wcontinuous output against the 3,000W field maximum
Published alongside the continuous rating as inverter surge.
Total combined DC and solar input. The High Power Port alone accepts 600W across a 12.3V to 60V window at up to 20A.
Refrigerator planning profile
An estimated 23.1 hours from the visible defaults
This calculation uses a 150W running load, 1,200W starting load, 33% duty cycle, 90% usable capacity, and 88% AC efficiency. It is planning math, not a measured refrigerator test.
Published output clears this conservative load profile.
Source ledger
Important fields are tied to a specific source. Manufacturer claims, government guidance, calculations, and planning assumptions remain separate.
- Goal Zero YETI 1500 specifications
Goal Zero
Published specification table covering capacity, chemistry, cycle life, inverter output, the High Power Port solar window, combined solar input, weight, and warranty.
official product page